DEHN - Safety Equipment
Working safely? Protect yourself against arc flashes with DEHNcare
When working on electrical installations, a commonly underestimated hazard lurks: the arc flash. It can be caused by technical defects, operating errors, contamination, vermin, or even falling tools. A risk that can’t be eliminated entirely – but it can be proactively managed with the right personal protective equipment (PPE).
DEHNcare PPE: Developed for those working close to danger
DEHNcare offers a complete range of PPE against arc flashes, specifically designed for electrically skilled professionals. Comfort and ease of wear are essential, but even more important is the reliable protection DEHNcare provides – when worn correctly and consistently.
ArcFit clothing complies with APC 2 / PPE category 4 and is suitable for work on installations with high energy levels. The High-Level Protection (HLP) garments protect against energy levels up to ATPV: 63 cal/cm² and ELIM: 58 cal/cm² – ideal for low and medium voltage switchgear.
Functional underwear (undershirts, briefs, polos) increases the level of protection. Following the layered clothing principle, a higher protection class can be achieved. Each layer adds extra safety.
Protective gloves provide essential protection where the risk of arc flash contact is highest: the hands. Since hands come very close to danger zones, they must be reliably protected (protection up to ATPV 40 cal/cm²).
Helmets, visors, and balaclavas protect the head, face, and eyes from burns, flying particles, and heat. DEHNcare visors are clear, scratch-resistant, and highly durable (ATPV: 14 cal/cm² or 25 cal/cm²).
With DEHNcare, you increase not only personal safety, but also fire protection and the availability of your electrical installations. Investing in PPE means investing in continuity and peace of mind.
DEHNcare
= Personal protection + Operational reliability of electrical systems.
Check out our other success stories:
-
TR Service - Future-proof low-voltage panelRead moreTR-Service provides industrial maintenance using all disciplines, from electrical and mechanical to hydraulic and pneumatic. With support from Breemes, the company installed a large low-voltage panel. ‘After discussing my summary plan with them, I decided to just do it,’ says director-owner Raoul Tielens. At Breemes' suggestion, the panel was future-proofed by preparing it for power monitoring.
-
Peeters - Young Company, New EquipmentRead moreSince its founding a few years ago, Peeters Robotic Solutions has been rapidly developing, working on projects both domestically and internationally and providing standard solutions for industrial palletizing. The company stays up to date with the latest technology, including Festo’s electrical and pneumatic drives. To achieve this, it relies on itsme. “Thanks to their expertise and skills, we can bring innovation to the forefront for our customers.”
-
Kusters - Putting weight behind itRead moreKusters was looking for a weighing solution for its banknote devaluation machines that was easy to integrate into the Siemens control system. Through itsme, they came into contact with the right knowledge carriers at Siemens. ‘For us as Kusters, itsme is not only a supplier but also a source of knowledge, with which we co-engineer certain components and process steps, such as this weighing system.’
-
Eneco - Green light for green electricity and steamRead moreEneco Bio Golden Raand, located in the port area of Delfzijl, converts biomass into green electricity and green steam. Each year, the plant processes approximately 300,000 tons of waste wood from the Netherlands and neighboring countries. As part of Eneco’s climate ambitions, a project began in 2022 to replace the existing fluorescent lighting in and around the boiler room. The project was carried out under the supervision of itsme. “Two factors were important in this process: the cost, of course, but also the level of service.”
Why not take a look at these trainings we offer:
-
TIAP-NETWORKRead moreavailable in Dutch