text.skipToContent text.skipToNavigation
  1. Home
  2. Siemens Sentron

Siemens Sentron​​​​​​​

Power monitoring made simple

Easy, reliable, cost-efficient

Keeping an eye on energy consumption offers benefits on numerous levels: In addition to cost savings through optimized consumption, the monitoring of power networks and power quality in infrastructures and industrial plants ensures greater reliability. At the same time, systematic power monitoring raises awareness about actual power consumption and is therefore also an important prerequisite for more energy efficiency. Integrated in open IoT operating systems such as MindSphere, these optimization potentials can be increased even further. With a simple power monitoring system, you’re paving the way for regular energy audits and an operational energy management system in accordance with ISO 50001 and ISO 50003.

New measuring devices from Siemens capture energy data with higher accuracy 

  • Exact recording of energy consumption and electrical parameters
  • Secure data transfer over existing communication networks
  • Flexible use in industrial and commercial buildings as well as data centers

Siemens Smart Infrastructure has added the 7KM PAC3220 and 7KM PAC3120 measuring devices to its Sentron power monitoring portfolio. These devices capture energy and system data from buildings, infrastructure and industrial facilities and transfer them via standard communication protocols to higher-level energy management, automation and IoT systems. This data can then be used to identify energy hogs, detect system malfunctions as early as possible and proactively prevent downtimes. This allows companies to sustainably boost their energy efficiency and system availability. The new devices offer higher accuracy than the previous models and have a new design. 


New measuring devices from Siemens capture energy data with higher accuracy​​​​​​​

The new 7KM PAC 3220 devices are designed for sophisticated energy management operations in industrial environments. They can be used in any 50 Hertz (Hz) and 60 Hz grids and measure electrical parameters such as voltage, phase current and frequency as well as active, reactive and apparent power. In addition to instantaneous values, the devices also store precise mean values for periods between 10 seconds and 15 minutes. Standard communications protocols such as Modbus TCP, Profibus or Profinet can be used to transfer the data to higher-level systems. New features include a color LED display on the device and an integrated web interface allowing measurements to be displayed in a browser.

The 7KM PAC 3120 devices offer an easy and cost-effective way to get started with power monitoring in buildings and infrastructures, such as office buildings or data centers. They record energy consumption and basic values such as current, voltage and power. The Modbus RTU communication protocol can be used for data transfer.

​​​​​​​When combined with the Sentron powermanager analytics software, the 7KM PAC series measuring devices form a complete and easy to implement power monitoring system, which captures and analyzes energy values from infeed to individual loads. The devices are certified according to International Electrotechnical Commission (IEC) and Underwriters Laboratories (UL) standards and can be used worldwide. The measuring devices are easy to install in existing power distribution systems.
 


More information about SENTRON and the ISO 50001 and ISO 50003 standards can be found in this brochure :  Brochure SENTRON

​​​​​​​

I am interested in this news from itsme Breemes

You might also be interested in this:
Schneider Electric XIOT
The Internet of Things: IoT, is the extension of the Internet to connected devices. Telemecanique Sensors offers a wireless solution to collect data from remote equipment and use this data, via the Internet, on a PC or mobile device. The XIOT Cloud connected switch from Telemecanique Sensors is based on LPWAN: low power wide area network, technology, operated by Sigfox. The Sigfox network covers 32 countries and is already very extensive in Europe. It is also being rapidly deployed in the US and Asia-Pacific. It uses antennas with a range of around 50 km. The map on the Sigfox website shows exactly which areas are covered by the Network.
Read further
Siemens Sitop
When it comes to electricity, you can stay with the old. Or benefit from the new standard. Experience the start of a new chapter in the world of standard power supplies with the SITOP PSU6200 all-around power supply. Whether you’re a builder or operator of control panels, machines, or plants, all users benefit from the ingenious functions and features of the new SITOP PSU6200 product line – throughout the entire lifecycle, from planning and engineering to installation and operation.​
Read further
Pilz PSENOpt II
The second generation of light curtains, PSENopt II, provide safe access to the production process and provide finger, hand and body protection, depending on the requirement. The first Type 3 safety light curtains are specifically designed for applications up to PL d of EN/IEC 61496-1. Type 4 light curtains are also available for applications up to PL e in accordance with EN/IEC 61496-1/-2. As the units are so robust, PSENopt II sensors provide protection against shock, collision and vibration and so are suitable for use in rugged industrial environments. The operator can evaluate the essential causes and system defects responsible for the machine stop by means of the LEDs. Downtimes are reduced as a result.
Read further
Leuze ODS 110
With our expanded line of distance sensors, you can choose from a large selection of different designs with especially large operating ranges and multiple switching points. “With us, you always find the right solution for your pallet warehouse applications, such as for compartment occupation checks, push-through protection or collision protection.”
Read further