The Fluke 87-V: ideal for accurate measurements at variable speed drives and in industrial environments
Technological advances now allow accurate electrical measurements to be taken during installation and maintenance using a digital multimeter (DMM), allowing technicians to diagnose problems that lead to premature failure.
Fluke 87-V digital multimeter
Historically, no digital multimeter could accurately measure AC drives until Fluke released the new version, the 87-V.
The Fluke 87-V has all the features you would expect from a multimeter. It measures voltages up to 1000 V AC and DC and current up to 10 A AC and DC. In addition, it can measure resistance (up to 50 MOhm), capacitance (up to 10000 µF) and frequency up to 200 kHz. Also notable is the large clear display that allows you to easily read the measured values. However, the most innovative feature of the Fluke 87-V is its ability to measure frequency-controlled motors. With an "ordinary" multimeter, you will find that the value read out may differ significantly from the value indicated on the display of your frequency converter. This is due to the complexity of the signal.
Built-in filter
This is because the frequency controller outputs a pulse-like signal with a high switching frequency (more kHz) and a low control frequency. An RMS multimeter is going to calculate the RMS value of this signal but this is not the value as the motor experiences the signal. Because of the impedance of the motor, it turns this "high frequency" signal into a low frequency sinusoidal signal. You also observe this if you were to visualize the waveform of the current on a ScopeMeter. The Fluke 87-V has a built-in filter so that it displays the value as measured by the motor. Therefore, the Fluke 87-V becomes the tool of choice for every maintenance technician in industry.
Stay up to date with the latest news:
-
Schneider Electric - Modicon Edge I/O NTS the new standard in industrial automationRead moreIn the rapidly evolving world of industrial automation, it is crucial to have systems that are reliable, efficient, and future proof. The Modicon Edge I/O NTS from Schneider Electric meets these requirements.
-
Sylvania - RetrunKitRead moreSylvania's RetrunKit is a universal trunking unit for replacing fluorescent lighting units in existing installations. This durable solution allows you to update an installation to an LED solution without completely replacing it! The universal unit is 1530 mm long and compatible with more than 15 different brands of track systems.
-
Eupen - New halogen-free cablesRead moreKabelwerk EUPEN AG is expanding its range of halogen-free cables with the new cable families EXGB Cca-s1,d2,a1 and EAXeGB Cca-s1,d2,a1. These cables fully comply with the recently revised NBN HD 603-5A standard (2023) and the updated technical regulations C1/107 from Synergrid, published at the end of August 2024.
-
Have Digitap - FlukeRead moreFluke is globally recognized as a leading manufacturer of high-quality test instruments, trusted by professionals across sectors such as electrical engineering, industrial maintenance, and installation technology. Thanks to their reliability, accuracy, and durability, Fluke tools are an essential part of every technician’s toolkit.
Check out our other success stories:
-
TR Service - Future-proof low-voltage panelRead moreTR-Service provides industrial maintenance using all disciplines, from electrical and mechanical to hydraulic and pneumatic. With support from Breemes, the company installed a large low-voltage panel. ‘After discussing my summary plan with them, I decided to just do it,’ says director-owner Raoul Tielens. At Breemes' suggestion, the panel was future-proofed by preparing it for power monitoring.
-
Peeters - Young Company, New EquipmentRead moreSince its founding a few years ago, Peeters Robotic Solutions has been rapidly developing, working on projects both domestically and internationally and providing standard solutions for industrial palletizing. The company stays up to date with the latest technology, including Festo’s electrical and pneumatic drives. To achieve this, it relies on itsme. “Thanks to their expertise and skills, we can bring innovation to the forefront for our customers.”
-
Kusters - Putting weight behind itRead moreKusters was looking for a weighing solution for its banknote devaluation machines that was easy to integrate into the Siemens control system. Through itsme, they came into contact with the right knowledge carriers at Siemens. ‘For us as Kusters, itsme is not only a supplier but also a source of knowledge, with which we co-engineer certain components and process steps, such as this weighing system.’
-
Eneco - Green light for green electricity and steamRead moreEneco Bio Golden Raand, located in the port area of Delfzijl, converts biomass into green electricity and green steam. Each year, the plant processes approximately 300,000 tons of waste wood from the Netherlands and neighboring countries. As part of Eneco’s climate ambitions, a project began in 2022 to replace the existing fluorescent lighting in and around the boiler room. The project was carried out under the supervision of itsme. “Two factors were important in this process: the cost, of course, but also the level of service.”
Why not take a look at these trainings we offer:
-
TIAP-NETWORKRead moreavailable in Dutch