Rittal - Cable glands increase safety even in extreme conditions
The importance of cable glands is often underestimated. Wrongly so, because in many industries they contribute substantially to the proper functioning of operating equipment. The right cable gland protects any enclosure from fairly threatening external influences such as dust and moisture. In extreme conditions such as arctic cold or tropical heat, it is the heavy duty cable glands made of nickel-plated brass or stainless steel that make the difference. Even bases, acids and chemicals hold them back.
Glands ensure safe passage of cables through panels to and from appliances. They can insulate cabinets, provide earthing and strain relief, and protect against electromagnetic interference. There are also cable glands specially made to withstand severe explosions or to provide sealing under water.
Nickel-plated brass for the toughest conditions
Cable grommets come in all shapes and sizes. They are made of plastic, stainless steel, copper and aluminium, among others. The best type depends on the environment in which they are used. Glands made of nickel-plated brass with silicone seal are in any case suitable for the toughest conditions. Think of use on installations that are outside in the icy cold, or just inside, in the heat of a bakery or iron smelter.
There are also nickel-plated brass cable glands specifically intended for environments where contact with acids and bases may occur. These glands are particularly widely used in the petrochemical and pharmaceutical industries.
Like stainless steel, nickel-plated brass is corrosion-resistant, but the cost price is much lower. Because the material is particularly hard and strong, the cable glands last a long time and require little maintenance.
Hummel VariaPro 'heavy duty' glands Temp and FKM
With the VariaPro family, Hummel markets a comprehensive range of glands for heavy duty applications. The VarioPro FKM is the latest member and belongs to the category that is hardened against acids, bases and chemicals. The seal is made of FKM. That is a fluorocarbon-based synthetic rubber, known for its broad chemical resistance. This makes this gland therefore very suitable for the chemical industry.
The VariaPro Temp is specially designed for use at extreme temperatures. These glands have a range of minus 60 to plus 200 degrees Celsius. So they are just as usable in icy cold as in scorching hot greenhouses. The inside is sealed with silicone. Incidentally, even the FKM does not shy away from cold or heat with a range between -20 and 180 degrees Celsius.
Both types also feature EMC attenuation, meaning they protect cables from electromagnetic influences of nearby devices. They are also protected against twisting during cable assembly. They have all relevant approvals for international markets and numerous industries.
The VarioPro series can handle pressures up to 10 bar and comes under protection class IP 68. They are available in all common metric sizes. Combined with special inserts, they thus cover a wide range of cable diameters. The shape makes these glands particularly suitable for installation in places where space is limited.
Wide range of glands for demanding markets
The VariaPro glands are therefore specifically for demanding markets. The Pro Temp is especially suitable for application in cold environments such as cold rooms and refrigeration plants but can also be used in hot conditions, especially in industry. The FKM is highly resistant to acids and chemicals used, for example, in the process industry. The series also includes extra fire-resistant glands (for the rail industry) as well as glands that meet the high hygiene standards that apply in the food sector. Finally, there are armoured cable glands for explosion-prone environments such as power plants, the chemical industry or paint shops.
Stay up to date with the latest news:
-
Rittal - New F-gas RegulationRead moreThe new European F-gas Regulation (EU) 2024/573 has been in force since 11 March 2024 and will be phased in gradually from 1 January 2025. The regulation is an important pillar of the European climate strategy and has one clear goal: to drastically reduce emissions of fluorinated greenhouse gases and ultimately phase them out completely by 2050. This has far-reaching consequences for the choice, use and future availability of refrigerants in industrial refrigeration and air conditioning systems.
-
Rittal - RiLineXRead moreThe world of panel and switchgear construction is changing rapidly. Electrification, the rise of direct current technology and increasing project complexity call for efficient solutions. Rittal is responding to this with RiLineX, a modular power rail system that helps installers and engineers work faster and more safely.
-
Rittal - Complete DirectRead moreRittal's Compleet Direct series offers a fast and flexible solution for IT environments where efficiency and reliability are key. Thanks to predefined configurations based on common market requirements, there is always a suitable enclosure solution available. The pre-assembled design saves time during installation and increases ease of assembly. This allows customers to experience a streamlined process from selection to commissioning. Translated with DeepL.com (free version)
-
Rittal - HUMMEL Cable glandsRead moreIf you want to protect your components properly against external influences, a strong enclosure alone is not enough. There are always cables running to and from your equipment, which is why you need a cable gland in addition to the enclosure for a complete solution for protecting your equipment. This ensures that the end of the cable running to your enclosure is securely attached. After all, your installation is only as good as its weakest link.
Check out our other success stories:
-
Henkelman - Opportunities for KittensRead moreFor a long time, itsme was just a “small” supplier of electrical components to Henkelman, a manufacturer of vacuum sealers. That changed when Andreas Klein joined Henkelman as a supply chain engineer in late 2024. During his studies, he had become familiar with procurement kitting, and now he saw opportunities to make procurement at his new employer more efficient, with itsme as a partner. In his current role as procurement manager, he is constantly looking for ways to further optimize costs across the board.
-
Bilfinger - Urgent Need for a Service-Oriented ClientRead moreTechnical services provider Bilfinger performs, among other things, routine and emergency maintenance in the process industry. In that sector, production downtime is very costly. When replacement parts are needed, it’s always a matter of urgency. At itsme, they’re used to that. “We excel at responding very quickly to our customers. If necessary, we’ll search the entire market.”
-
Uniper - Flexibility deployed for continuityRead moreContinuity of energy supply is the top priority for energy company Uniper. The modernization of the control technology required training for programmers, technicians, and engineers.
-
Sabond - High-quality Belgian board for Chinese machineryRead moreSabond, an installation company, commissioned Breemes to provide advice and design a low-voltage switchboard
Why not take a look at these trainings we offer:
-
TIAP-NETWORKRead moreavailable in Dutch